Regioselective addition reactions at C-2 of 3,4-dihydropyrimidinones. Synthesis and evaluation of multifunctionalized tetrahydropyrimidines

Multifunctionalized tetrahydropyrimidines derivatives have been synthesized from Biginelli 3,4-dihydropyrimidin-2-(1H)-thiones (DHPMs) efficiently. The transformation includes desulfurization of DHPMs with Raney-Ni and subsequent regioselective C-2 functionalization using a variety of C-nucleophiles with simultaneous activation with ethyl chloroformate. Functionalized pyrimidine derivatives containing bulky substituents at C-2 of the pyrimidine ring are cytostatic.     

KHSO4: a highly efficient and reusable heterogeneous catalyst for hydroarylation of styrenes

Abstract  

Hydroarylation of styrenes with arenes/heteroarenes using KHSO₄ (10 mol%) as an efficient heterogeneous catalyst is described. High conversion and selectivity (>99%) were observed for hydroarylation of styrenes with 2-naphthol at reflux temperature of 1,2-dichloroethane. Yields were quantitative with all styrenes. Moderate to good conversions and selectivities were achieved with other aromatics and heteroaromatics under the same conditions. Regeneration and reusability of KHSO₄ were demonstrated. Addition of a trace amount of water could help to reactivate the KHSO₄ through dispersion and to facilitate the hydroarylation reaction.     

Conformational control in a bipyridine linked π-conjugated oligomer: cation mediated helix unfolding and refolding

A chiral π-conjugated oligomer having alternate bipyridine and carbazole moieties connected through acetylinic bonds undergoes helical folding in chloroform-acetonitrile (40/60, v/v) as evident by fluorescence and circular dichroism changes. In the presence of transition metal cations such as Zn(2+) defolding of the helical conformation occurs. Upon decomplexation of the cation with EDTA, the helical conformation is regained.     

Arylbenzo[<Emphasis Type="Italic">h</Emphasis>][1, 6]naphthyridine Derivatives: Synthesis and Photophysical Properties

Suzuki-Miyaura cross coupling was successfully used for C5-arylation in 4-amino-2-chloroquinoline-3-carbaldehyde using arylbornic acid and tetrakistriphenylphosphine palladium catalyst in water. Friedländer condensation reaction on 4-amino-2-chloro/2-arylquinoline-3-carbaldehyde and aromatic ketones gave novel aryl and diarylbenzo[h] [1, 6]naphthyridines in good yields. Fluorescence quantum yields were increased by introducing C2 and C5 π donor aryl benzo[h][1, 6]naphthyridines derivatives.

Open image in new window

Figure Synthesis of Fluorescent Arylbenzo[h][1, 6]naphthyridine

     

Synthesis and optical properties of Cr doped ZnS nanoparticles capped by 2-mercaptoethanol

Nanoparticles of Zn_1−xCr_xS (x=0.00, 0.005, 0.01, 0.02 and 0.03) were prepared by a chemical co-precipitation reaction from homogenous solutions of zinc and chromium salts. These nanoparticles were sterically stabilized using 2-mercaptoethanol. Here a study of the effect of Cr doping on structural, morphological and optical properties of nanoparticles was undertaken. Elemental analysis, morphological, structural and optical properties have been investigated by energy dispersive analysis of X-rays (EDAX), scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-visible spectroscopy .EDAX measurements confirmed the presence of Cr in the ZnS lattice. XRD showed that ZnS:Cr nanoparticles crystallized in zincblende structure with preferential orientation along (1 1 1) plane. The average sizes of the nanoparticles lay in the range of 3-6 nm and lattice parameters were in the range of 5.2-5.4 Å. Lattice contraction was observed with an increase of Cr concentration. The particle size and lattice parameters obtained from TEM and SAED images were in agreement with the XRD results. The absorption edge shifted to lower wavelengths with an increase in Cr concentration as per UV-Vis spectroscopy. The band gap energy values were in the range of 3.85-4.05 eV. This blueshift is attributed to the quantum confinement effect.     

RF-PACVD of water repellent and protective HMDSO coatings on bell metal surfaces: Correlation between discharge parameters and film properties

Hexamethyldisiloxane (HMDSO) films have been deposited on bell metal using radiofrequency plasma assisted chemical vapor deposition (RF-PACVD) technique. The protective performances of the HMDSO films and their water repellency have been investigated as a function of DC self-bias voltage on the substrates during deposition. Plasma potential measurements during film deposition process are carried out by self-compensated emissive probe. Optical emission spectroscopy (OES) analyses of the plasma during deposition reveal no significant change in the plasma composition within the DC self-bias voltage range of −40 V to −160 V that is used. Raman and X-ray photoelectron spectroscopy (XPS) studies are carried out for film chemistry analysis and indicate that the impinging ion energy on the substrates influences the physio-chemical properties of the HMDSO films. At critical ion energy of 113 qV (corresponding to DC self-bias voltage of −100 V), the deposited HMDSO film exhibits least defective Si-O-Si chemical structure and highest inorganic character and this contributes to its best corrosion resistance behavior. The hardness and elastic modulus of the films are found to be bias dependent and are 1.27 GPa and 5.36 GPa for films deposited at −100 V. The critical load for delamination is also bias dependent and is 11 mN for this film. The water repellency of the HMDSO films is observed to be dependent on the variation in surface roughness. The results of the investigations suggest that HMDSO films deposited by RF-PACVD can be used as protective coatings on bell metal surfaces.     

Application of Ball Milling Technology to Carbohydrate Reactions: I. Regioselective Primary Hydroxyl Protection of Hexosides and Nucleoside by Planetary Ball Milling‡

Dry ball milling of hexosides with trityl chloride in the presence of DABCO or Na₂CO₃ has been found to result in their complete conversion to the respective 6‐O‐trityl ethers. Further wet grinding of the reaction mixture with Ac₂O in the presence of DMAP led to the respective fully protected hexosides in good to excellent yields after isolation. It has been found to be an effective one‐pot two‐step synthesis under solvent‐free condition. The speed of homogenization has been shown to highly influence the rate and outcome of the reaction, and commercially available planetary ball mill has been proved to be very convenient for carrying out the reaction under standardized and reproducible conditions.     

From beads-to-wires-to-fibers of tungsten oxide: electrochromic response

Suitable host lattice and morphology for easy intercalation and deintercalation process are crucial requirements for electrochromic device. In this investigation, the evolution of structural and morphological changes and their effect on electrochromic (EC) properties of spray-deposited WO₃ thin films are studied. Films of different morphologies were deposited from an ammonium tungstate precursor solution using a novel pulsed spray pyrolysis technique (PSPT) on tin-doped indium oxide (ITO) coated glass substrates by varying quantity of spraying solution. Interesting morphological transition from beads-to-wires-to-fibers as a function of quantity of sprayed solution has been demonstrated. The porosity, crystallinity and “open” structures in the films consisting of beads, wires, and fiber-like morphology enabled us to correlate these aspects to their EC performance. WO₃ films comprising wire-like morphology (20 cc spraying quantity) exhibited better EC properties both in terms of coloration efficiency (42.7 cm²/C) and electrochemical stability (10³ colored/bleached cycles) owing to their adequate open structure, porosity, and amorphicity, compared with the films having bead/fiber-like morphology.     

Energy relaxation method for chemical non‐equilibrium flow computations

In this paper, an algorithm for chemical non‐equilibrium hypersonic flow is developed based on the concept of energy relaxation method (ERM). The new system of equations obtained are studied using finite volume method with Harten–Lax–van Leer scheme for contact (HLLC). The original HLLC method is modified here to account for additional species and split energy equations. Higher order spatial accuracy is achieved using MUSCL reconstruction of the flow variables with van Albada limiter. The thermal equilibrium is considered for the analysis and the species data are generated using polynomial correlations. The single temperature model of Dunn and Kang is used for chemical relaxation. The computed results for a flow field over a hemispherical cylinder at Mach number of 16.34 obtained using the present solver are found to be promising and computationally (25%) more efficient. The present solver captures physically correct solution as the entropy conditions are satisfied automatically during the computations. Copyright © 2007 John Wiley & Sons, Ltd.